Record HACCP and sanitation checks from a phone
How operators complete CCP, pre-op and sanitation rounds on the line, and what happens when a reading is out of limit.
3 min read
Checks are recorded where the work happens. The agent watches each entry against its limit and acts on failures while the product is still in front of you.
1
Open the round that is due
The operator opens the round for their line and shift. Each check shows what to measure or inspect and the limit.
2
Record the reading or result
Enter the value, pass or fail, and add a photo where it helps. Time, person and line are recorded automatically.
3
See a failure flagged immediately
An out-of-limit entry is flagged on the spot. The operator sees the corrective step from the plan, and the quality lead is notified.
4
Decide the hold
KnowQuality proposes a hold on the affected product or lot. The quality lead approves or releases, and the decision is recorded with the check.
Run one line through it.
Bring your pre-op or HACCP checks for one line. We will show you capture on a phone, the NCR, the CAPA and the trace.
More guides in Inspections, NCRs & CAPA
More resources