Knowella

How the video supports KIM

What the video measures for BAuA KIM (lifts per minute, the lift postures, the share of time the back is bent), what you still enter, and how to film for it.

3 min read
BAuA's Key Indicator Methods (KIM) rate a working day one sub-activity at a time, and some of their inputs are hard to judge by eye: how much of the time the back is bent, how often the worker lifts, the posture at each end of a lift. A video measures those across the whole clip. It never sets a score: every value it proposes is yours to confirm or change, and what the camera cannot see (weights, forces, hours, conditions) stays yours to enter. The page shows this as "What the video does for KIM", and each indicator carries a badge: Video can measure, Video: partly, Video: reference only, or You enter.

Step 1 of 5

KIM-LHC: lifting, holding and carrying

The video counts lift-like hand movements per minute; multiply by the minutes per day on the sub-activity to get the operations per day. It measures the posture at the start and end of each lift, and how often the arms are raised or the hands are above the shoulder. Side bending is measured only from a front view; trunk twisting is not measured.

  • The video measures: Lifts per minute, the start and end posture, arms raised, hands above the shoulder; side bending from the front.
  • You enter: The load's weight and handling, the distance from the body, the six working conditions, work organisation, and the minutes per day.

Step 2 of 5

KIM-ABP: awkward body postures

The video measures the share of the measured time in each posture: back bent 20–60° or over 60°, sitting, standing, hands above the shoulder, arms raised, kneeling or squatting (A1–A5, B1, B2, C1, C2), and the head bent forward or back. A body region measured for under half of the time is left out, never filled in. Lying (B3) is not measured.

  • The video measures: The posture shares and the head; side bending from the front.
  • You enter: Hours per day, lying postures, trunk twisting, support, narrow space and the other conditions.

Step 3 of 5

KIM-PP, KIM-MHO, KIM-BF and KIM-BM

For these methods the video measures no value. It shows the posture it measured beside the form's posture question, as reference only, and you choose the answer. Everything else is entered.

Step 4 of 5

Confirm or change each value

After the analysis, each input the video can fill shows "Video suggests …" with a Use button, or "Use the video's values" fills them all. Values from the video stay marked until you confirm them, and no result is shown before. If you change one, say why: the reason is kept in the audit trail.

Step 5 of 5

Film for KIM

Film lifting and the back from the side: bending is measured best side-on. For side bending, add a front view. Keep the whole body in shot and record at least one full work cycle, and a minute or more when a posture is held.

Was this page helpful?

Ready to put this into practice?

Start free, or book a walkthrough and we'll set up your first assessment with you.